Skip to content
product-header-3-2

ELE18RA1A (RAINIER)

8 Channel 1.6Gbps Pin Electronics/DAC/PPMU/Deskew

rainierchiprightdie

8 Channel 1.6Gbps Pin Electronics/DAC/PPMU/Deskew

The Rainier is a highly integrated System-on-a-Chip (SoC) pin electronics solution that incorporates every analog function, along with digital support circuitry required to create 8 independent pin channels for Automated Test Equipment. Each channel is configured via a 100MHz SPI interface, and all real time data is programmed and read back through high speed FLEX I/O pins that can be configured to interface directly to other devices using multiple single-ended and differential logic families.

Rainier is ElevATE’s flagship PE, PMU, DAC + Deskew product that combines the market’s lowest power and 1.6Gbps performance. Rainier’s high-density 8 independent channels feature 500mW per channel with driver and comparator running at max speed.  

SPECIFICATIONS

Rainier is our Next-Gen High-Speed, Low-Power Solution for ATE and semiconductor testing, delivering faster data rates, low power, and superior efficiency for high density / low power tester configurations.

Pin Electronics Driver
  • 3-level Driver with HiZ Capability (DVH, DVL, VTT)
  • 100mV to 6V Swing Across -1.5V to +4.5V Range
  • Low HiZ Leakage over Entire I/O Range
  • Short Circuit Protection
  • 55ps Total Jitter
  • tRISE/tFALL 150ps 20/80 at 1.0V
  • 50Ω Programmable Termination
  • Selectable Pre-emphasis Levels

High Speed Single Ended and Differential Comparators
  • Single Ended Input Span -1.5V to +4.5V
  • 1GHz Equivalent Input Bandwidth
  • Selectable (On/Off) Hysteresis
  • Programmable Output Impedance
Per Pin PMU (PPMU)
  • 4 Quadrant Operation: FV, FI, MV, MI
  • FV Range: -1.5V to +4.5V
  • MV Range: -2.0V to +5.0V
  • Current Ranges: ±4μA, ±40μA, ±400μA, ±4mA, ±40mA
  • Gang Mode up to ±280mA
  • Programmable Voltage and Current Limit Clamps
  • Go-No-Go Comparators
 
Per Pin Active Load
  •  2 Active Load Ranges (±24mA, ±1mA)
  • Programmable Source, Sink, and Commutation Voltage
  • Optional Real-Time Enable/Disable
     
Per Pin Timing Deskew
  • − 1.9ns tPD Prop Delay Adjust Range, 3ps Resolution
    − Duty Cycle Adjust Range –200ps to +200ps
9 Dedicated Level DACs per Channel
  • 16-bit Resolution with Offset Correction
  • DUT Ground Sense and Correction (Per Chip)
  • 100MHz SPI Interface
  • Single-Ended and Differential High-Speed IO Capability
  • Analog Measure Bus (Per Channel and Per Chip)
  • Programmable Over-Temperature Protection and Alarms 
  • PD < 500 mW per Channel at Maximum Speed
  • 13mm x 13mm, 225 Ball fcCSP (0.8mm Pitch)
rainier-block

 

GUIDE + DATASHEET + DOWNLOAD - RAINIER

Here you can access our product manuals, datasheets, and get-started guides.

REQUEST PRODUCT DATASHEET

 

 

PRODUCT COMPARISON

Compare ElevATE's Pin Electronic DPS Products side by side with our detailed comparison table, designed to help you identify the best solution for your testing needs with ease.

SUPPORT INQUIRIES

SIGN INTO SUPPORT

In need of assistance? We’ve got you covered.
Click the link below to login to our support portal or reach out to us directly at
supportdesk@elevatesemi.com. We’re here to help!

SAMPLES INQUIRIES

Explore ElevATE's 2025 Product Selection Guide

Discover our latest lineup of high-performance test semiconductor products and solutions in the updated 2025 Product Selection Guide. Get detailed specifications, new product releases, and the right solutions for your test requirements—all in one place.
Read More
psg-(1)
// your inline JS here