Skip to content
Close
product-header-3-2

ELE18RA1A (RAINIER)

8 Channel 1.6Gbps Pin Electronics/DAC/PPMU/Deskew

rainierchiprightdie

8 Channel 1.6Gbps Pin Electronics/DAC/PPMU/Deskew

The Rainier is a highly integrated System-on-a-Chip (SoC) pin electronics solution that incorporates every analog function, along with digital support circuitry required to create 8 independent pin channels for Automated Test Equipment. Each channel is configured via a 100MHz SPI interface, and all real time data is programmed and read back through high speed FLEX I/O pins that can be configured to interface directly to other devices using multiple single-ended and differential logic families.

Rainier is ElevATE’s flagship PE, PMU, DAC + Deskew product that combines the market’s lowest power and 1.6Gbps performance. Rainier’s high-density 8 independent channels feature 500mW per channel with driver and comparator running at max speed.  

SPECIFICATIONS

Rainier is our Next-Gen High-Speed, Low-Power Solution for ATE and semiconductor testing, delivering faster data rates, low power, and superior efficiency for high density / low power tester configurations.

Pin Electronics Driver

  • 3-level Driver with Hi-Z Capability (DVH, DVL, VTT)
  • 100mV to 6V Swing Across -1.5V to +4.5V Range
  • Extremely Low Hi-Z Leakage over Entire I/O Range
  • Short Circuit Protection
  • 30ps Deterministic Jitter at 1.6Gbps
  • 40ps Total Jitter range
  • Trise/Tfall 160ps/150ps at 1V
  • Trise/Tfall 190ps/180ps at 2V
  • 50Ω Programmable Termination
  • Short Circuit Protection

Per Pin Comparator

  • Up to 6V Comparator Input Range
  • Comparator Input Equivalent Bandwidth = 2GHz
  • Selectable (On/Off) Hysteresis
  • Window and Differential Comparator

Per Pin PMU (PPMU)

  • FV, FI, MV, MI
  • 4 Quadrant Operation
  • -1.5V to +4.5V FV Range
  • -2 to +5V MV Range
  • 5 Current Ranges (±2μA, ±20μA, ±200μA, ±2mA, ±50mA)
  • Programmable Voltage and Current Clamps
  • Resistive Load Function (12 Selectable Resistor Values)
  • Per Pin Active Load
 
 
±24mA Maximum Current
 
  • Independently Programmable Current Source, Current Sink, and Commutating Voltage levels
  • Per Pin Timing Deskew

 

Propagation Delay Adjustment

  • 1.9ns Delay Adjustment Range
  • 3ps Delay Adjustment Resolution

  • Rising/Falling Edge Adjust Range -1.5ns to 1.5ns
  • Duty Cycle Adjust Range -200ps to +200ps
  • 9 Dedicated Level DACs per Channel
  • Per-Level Offset Correction
  • 16-bit Resolution
  • DUT Ground Sensing and Correction (1 Per Chip)
  • 100MHz SPI Interface
  • Single-Ended and Differential High-Speed IO Capability
  • Analog Measure Bus
  • Selectable Over-Temperature Protection
  • Monitor Per Channel
  • Pmax < 500mW per Channel with Driver and Comparator running at Max Speed
  • 13mm x 13mm, 225 Ball FcCSP (0.8mm Pitch)
rainier-block

 

GUIDE + DATASHEET + DOWNLOAD - RAINIER

Here you can access our product manuals, datasheets, and get-started guides.

REQUEST PRODUCT DATASHEET

 

 

PRODUCT COMPARISON

Compare ElevATE's Pin Electronic DPS Products side by side with our detailed comparison table, designed to help you identify the best solution for your testing needs with ease.

SUPPORT INQUIRIES

SIGN INTO SUPPORT

In need of assistance? We’ve got you covered.
Click the link below to login to our support portal or reach out to us directly at support@elevatesemi.com. We’re here to help!

SAMPLES INQUIRIES

Explore ElevATE's 2025 Product Selection Guide

Discover our latest lineup of high-performance test semiconductor products and solutions in the updated 2025 Product Selection Guide. Get detailed specifications, new product releases, and the right solutions for your test requirements—all in one place.
 Read More
DOWNLOAD THE 2025 PSG
psg-(1)
// your inline JS here