SPECIFICATIONS

Per-Pin PMU

•  FV, FI, MV, MI
• 4 Quadrant Operation
• 6 Current Ranges (±2μA, ±20μA, ±200μA, ±2mA, ±15mA, ±50mA)
• Programmable Voltage and Current Clamps
• Resistive Load Function (12 Selectable Resistor Values)
• Reduced Glitch Current Range Changing

Protection

•  On-Chip Junction Temperature Monitor
• Over-Temperature Shutdown Per-Chip

Global FORCE/SENSE Connectable to any Channel

Remote Sense from Adjacent Channel

100MHz SPI Interface

On-Chip Independent DACs to Generate DC Levels

•  6 DC Levels per Channel
• 2x 16-bit for Forcing Function
• 2x 8-bit for Clamps
• 2x 4-bit for Current Clamps
• On-Chip Offset and Gain Correction

Power Management

•  Independent Output Buffer Power Supply for both positive and negative currents to minimize power (VCCO and VEEO)

Monitor

•  Two MV/MI Monitors (one for each 4 channels)
• Ability to Route any Channel to Either Monitor
• On-Chip Signal Preconditioning (Optimized for Direct Connection to AD7609B)

Package/Power Dissipation

•  88 Pad, 10mm x 10mm MLF
• Pdq 150mW/Channel
• Pstandby 75mW/Channel

Applications

•  Automated Test Equipment
• Instrumentation